An automatic real-time processing system of the Earthquake Administration of Guangdong Province is developed for the biggish earthquake events and installed as the backup system for the national earthquake rapid determination． The test running of the backup system started from the middle of December，2008，and then the official running was from July，2009． The system can automatically determine three main parameters of earthquake within a few minutes after an earthquake occurs． We analyze the results of earthquakes automatically located from January，2009 to October，2010，in which 282 earthquakes with magnitude larger than 4. 0 can match the rapid reporting results of man-machine interactive earthquake location by CENC． The magnitude error of 70% matched events is within 0. 3，the location error of 69% matched events which occurred inside or around nation is smaller than 20km，and the location error of 73% matched events which occurred abroad is within 50 km． The initial location results cost about 3. 5 minutes on average after earthquakes occurred inside or around nation，the events occurring abroad are reported after 11. 1 minutes，and the automatically determined location is clearly more rapid than man-machine interactive determined location． The 284 global earthquakes with magnitude larger than 6. 0 can match the results of real-time determined location by EMSC，of which the magnitude error of 49% events is within 0. 3，the horizontal error of 73% events is smaller than 50km，the depth error of 68% events is not more than 50km，and for the events whose depths are more than 300km the depth error of 90% events is within 50km． We also discussed the events which can not be matched or have large location error．